rack and launchers hall of fame

[ilovefireworks]

?

[animeguru]

Though its a crappy picture, you're more than welcome to add mine.

http://www.animeguru.com/images/fireworks/12inchmortar02.jpg

There are a couple others, but that angle shows the rack best.

[carp]

Sweet and Simple 10 Shots. Attach to each other any way you want.

[St1dinoh]

here's a picture of my rack *snicker*

best pic i have of it. 75 shot 15 inch HDPE (big plywood box in the middle:D )
http://www.pyroreview.com/gallery/data/504/343IMG_0040.jpg

[noel]

here you go

http://img55.imageshack.us/img55/4536/bigrack2jf.jpg

http://www.pyrogear.net/5shotlowres.jpg

[johnny_boomboom]

Here is my 50 shot fan monsterosity....

[MNPyro]

I too will be lazy and not PM you but just post here :-)
Corner View (http://www.pyrouniverse.com/gallery/albums/userpics/10056/IMG_0002.JPG)
Side View (http://www.pyrouniverse.com/gallery/albums/userpics/10056/IMG_0001.JPG)

This is only 1 of my 25 shot racks, I don't have pictures of my 50 shot racks, but its a simple design...and maybe once I return home I will take a photo of it. Can you wait 6 months? :redface:
Anywho, enjoy.

MNPyro

P.S. Actually, new news, I may be headed home early, something along the lines of break rules that weren't supposed to be broken...we will see, I have 2 weeks to find an internship first. :-)

[St1dinoh]

*whistles* ^nice rack

seriously man did you have norm abrams or bob villa make that for you....looks very professional. like you could put some glass over it and use it as a coffe table.

speaking of that.....anyone using you racks for something other than shooting fireworks???

mine is holding up a big screen tv :lol: . i've got it sitting in my living room with the tubes facing me. my old tv stand was to wobbely so that 75 shot box above was the perfect solution.....i'll have to post a pic

[noel]

Next to my front door is a 3" mortar on a 6" square of plywood as a butt can so my wife has a place for them.

(2 years 2 months smoke free for me :) )

On the deck are 3 5" Mortars cut 1 foot tall, all nailed to a piece of plywood for the kids hockey sticks and baseball bats.


We have a large BBQ pit trailer, got tired of burning our hands brushing off the grill, so at the end of a 4 foot piece of 2", we attached a wire brush with half a dozen construction staples.

Had to Drain the kids 5x8' inflatable pool this summer, 200 gallon or so, but didn't want the water right in the low part of the yard where the pool was, so took a 20' stick of 2" and held one end up, filled with water, then dropped it down creating a massive siphon, emptied in a few minutes.

pipe is handy.

...and when a frisbee gets stuck on the roof, you'd never believe what I grab to get it off.......:)

[St1dinoh]

lol

i guess having all that surpluss hdpe laying around is a handy thing huh?

thats what you call a good problem.

[MNPyro]

*whistles* ^nice rack

seriously man did you have norm abrams or bob villa make that for you....looks very professional. like you could put some glass over it and use it as a coffe table.

Crazy enough, you're not the first person to say that...
Pulled from the old forum (http://www.pyrouniverse.com/phpBB2/viewtopic.php?t=2206) after I finished it.

Anyways, I'm unable to use it, and my other pyrostuff right now, so I can only gloat at how fun it was to use it. :-)

MNPyro

[razorback]

Here's my first attempt at an angle rack.

[johnny_boomboom]

Nice job... Razorback... That is sweet....


MNPYRO... Outrageous... that thing should be in the pyro HOF!!!!!!

[razorback]

Thanks.

[ilovefireworks]

?

[Mr.Pyro]

http://www.pyrouniverse.com/gallery/displayimage.php?album=9&pos=13

Here is one of the many racks that I have built.

[rapidshot]

i have seen so many rack and lauchers on this forum that i would like to add a hall of fame for just rack and launchers on my picturetrail page but i will never add anything unless i know its ok with the builder.so if its ok to add your rack or launcher just send me private messages or a picture and i will add it. a picture would be better.i also will add pictures of anything to do with fireworks on the mic page thank you

Mostly motar racks here so I will display something a little different. Here is one of my 24 Roman Candle racks.

http://www.tntpyro.com/images/Candle_Rack_Loaded_1.JPG

[dfluke]

My first rack. It's nothing fancy, but was a lot of fun to make.
http://www.dustinfluke.com/blog/images/big20display2.jpg

[Chris]

Here's mine http://img.photobucket.com/albums/v220/fireworkdude2/june82005001.jpg

[MrX8503]

isnt it unsafe using metal pipes for shells?

[razorback]

isnt it unsafe using metal pipes for shells?

there's no way a class c shell could blow those apart.

[DUSTY]

the pipe is 1/4 inch and if you wont to move it hope you got a hand truck.