Just throwing this out once now that they are ready.
Finally, all sizes are in stock and on the website.
Towards the bottom of the consumer mortar page:
http://www.pyrogear.net/plugged_mortars.htm
And Creamer is also available.
Big No No
December 11th, 2006, 01:20 PM
Is a "shameless plug" better than the old "wooden plug".LOL Glad to see you expanding your buisness.Your reputation speaks for it's self.At least you didn't start your thread with "Found some pretty cheap mortars" 8o .I hope to place my tube order in early january.Now I have some choices to make.;) .........Noah
Randall
December 11th, 2006, 01:32 PM
Doh!!-edit: I should have read your post/website a little closer! I saw 2" sdr-9 and it didn't click! I was for some reason thinking 2" ID, duh!
PyrogearSteve
December 11th, 2006, 01:41 PM
2" dr7 would be 1.67" I.D. We've never checked on getting that. Does anyone think they would want some if our supplier has it? It's a pretty thick wall. I expect the cost would be 60-80 cents more per mortar than dr11.
Also, we have creamer up on the site and have significantly decreased the price of our PGI shirts and jackets. *end shameless plug*
-Steve
Big No No
December 12th, 2006, 02:26 AM
Have you guys ever considered making some 9" tubes for mines only?Could you do a small custom order if it were part of a bigger order? :D
Randall
December 12th, 2006, 06:49 AM
sdr-7 sounds like it would be a little snug. couldn't really tell I guess unitll it was tried. with the variance in tube diameter and the variance in shell diameter seem like sdr-9 would be best compromise.
Switchfoot55
December 12th, 2006, 05:53 PM
Liking the looks of that creamer you have on the site...might have to invest a little into a bag.
Just a heads up, right above the picture of the fireball on the cremora page, the text reads: "5 Gallong Cremora fireball". Not sure if the "g" after gallon is intended or not...if not, just thought i'd bring it to your attention. Otherwise, great product as always!!!
noel
December 12th, 2006, 06:58 PM
Yeah, that's the um, imperial Gallong...
Steve is going to bag up some smaller boxes of creamer, a 12x12x12 box holds over 7 gallons. We'll see how much of a pain it is to box up and go from there.
DennyMo
December 20th, 2006, 09:40 AM
Have you guys ever considered making some 9" tubes for mines only?Could you do a small custom order if it were part of a bigger order? :DI would also be interested in shorter mortars for mines, but I think Pyrogear would have liability problems providing them. Their lawyers probably wouldn't want to sell them, because some yahoo would use it to launch a mortar, get injured by a low burst, and look around for someone to sue... :evil: They could mark them "For Mines Only" in fluorescent lettering, but that drives the cost up.
Probably easier and cheaper for us to just buy the 12" mortars, and either drill a fuse hole or chop off 3" of the tube - and then mark it "For Mines Only" in fluorescent lettering. ;) (Or remove the labels from the cardboard tubes that come on your reloadable mines, and tape them to your shortened HDPE mortars.)
RudyG
December 20th, 2006, 01:39 PM
Noel/Steve, would it be possible to order the DR9 in a 20-tube rack?
Thanks,
PA_Pyro
December 23rd, 2006, 01:54 PM
Probably easier and cheaper for us to just buy the 12" mortars, and either drill a fuse hole or chop off 3" of the tube - and then mark it "For Mines Only" in fluorescent lettering. ;) (Or remove the labels from the cardboard tubes that come on your reloadable mines, and tape them to your shortened HDPE mortars.)
Could you just make a wooden insert for the 12" plugs? Say you need a 9" tube. Make a plug 3" and drop in for your height adjustment.
Chris
shrapnel
December 23rd, 2006, 03:42 PM
Rudy, not trying to answer for them but I would sure think so, the only difference is in the id, od remains the same so it should fit in their standard racks, Im sure he'll respond with a def soon enough!
Kevin13
December 23rd, 2006, 05:45 PM
If you look on their website under the Mortars section, then under Special Sizes, they say "Racks are available for these sizes, Email for details."
So I'll go out on a limb and say, yes ;)
RudyG
December 25th, 2006, 05:15 AM
I got a reply from pyrogear the very next day. I didn't see the part about racks are available for these mortors before. Either I missed it or they added it after my post. It's nice to know I can get mortors and racks for some of the smaller shells. I've shot the Brothers five break greatest hits shells before but only had the tube with the kit.